Insertion EX DELTA Vortex Flow Meter Overview
The insertion EX DELTA is an economic metering option for flow measurement in pipelines greater than 200 mm in diameter. In new installation or retrofit, all you need to do is insert the probe into the pipeline. The hottap type is particularly beneficial for in-line measurement of a continuous process or where the process flow cannot be interrupted. It is available either with a standard fixed sensor or with a replaceable hottap sensor. With the replaceable sensor versions, it is possible to service the sensor without interrupting the process flow or removing the meter from the pipeline. They are particularly suited to long-run processes or on-site instrumentation where the utmost reliability and ruggedness are required. In areas where pipelines are densely installed, or in elevated or hazardous locations, a remotely mounted indicator may be preferred. The indicator can be mounted up to 200 mm from the basic flow meter, allowing the operator to monitor a number of widely distributed flow meters from a central control. Display options include total flow (resettable), instantaneous flow rate, % FS instantaneous flow rate, % FS bar graph
Insertion EX DELTA Vortex Flow Meter Features
• Stainless steel construction
• Versions for liquids or gas/steam flows
• Available with fixed or hottap type sensor
• Available with integral or remote indicator, with or without display
• Applicable pipeline diameter 200 – 2000 mm
• Wide flow range:
- Liquid: 72 to 67800 m3/hr
- Gas: 923 to 565000 m3/hr
- Steam: up to 3680 t/hr (3.03 to 1760 t/hr at 5 Bar)
• Wide temperature range –40 to +300°C
• Operating pressure up to 13.7 Bar
• Accuracy: ± 2% of FS
• Outputs: 4 - 20 mA or pulse
• Smart type with Hart® and field bus communication
• ATEX, FM, CSA and TIIS approved
Typical Insertion EX DELTA Vortex Flow Meter Applications
• Hot gases |
Products
