Main Navigation

My Basket 0

  • No items in cart

Items Total: 0

Sub Total: £0.00

The UK's Independent Flow and Level Specialists - Full International Shipping

Magnetic Flow Meters - Parameter Comparison

Parameter Comparison Table

Acceptable fluid Flow velocity (m/s) Output Pipe size range (mm) Linearity Sensor body Electrodes Liner Fluid temperature (°C) Max operating pressure (bar) ATEX approval
Magnetic Flow Meter Siemens Sitrans F M MAG 5100 W Conductive liquids 0.05 - 10 Frequency 4 to 20 mA, PROFIBUS DP & PA, DeviceNet, HART, CANopen, MODBUS RTU/RS485 25 - 1200 ± 0.5% (with MAG 5000)
± 0.25% (with MAG 6000)
Carbon steel Hastelloy C Hard Rubber or EPDM -5 to +70 40 No
Magnetic Flow Meter Siemens Sitrans F M MAG 3100 Conductive liquids 0.05 - 10 Frequency 4 to 20 mA, HART PROFIBUS DP & PA, MODBUS RTU/RS485 15 - 2000 ± 0.5% (with MAG 5000)
± 0.25% (with MAG 6000)
Carbon steel, Stainless steel AISI 316 Ti, Hastelloy C, Platinum, Titanium, Tantalum Neoprene, EPDM, PTFE, Ebonite, Linatex, Novolak -40 to + 70 ..... -20 to +180, depending on liner 100 (Neoprene, Ebonite) Yes (3100 Ex version)
Magnetic Flow Sensor Magflux A Conductive liquids 0.25 - 10 Frequency, 4 to 20 mA, HART 15 - 600 ± 0.15% Welded steel Stainless steel & special materials Hard rubber/soft rubber or PTFE +100 with rubber liner; +180 with PTFE liner 250 No
Magnetic Flow Sensor Magflux S Conductive liquids 0.25 - 10 Frequency, 4 to 20 mA 15 - 100 ± 0.15% Zirconium oxide Stainless steel & special materials PVDF, PVC -15 to +60 18 (at 10°C) No
Magflow Meter Signet 2552 Conductive liquids 0.05 - 10 Frequency/ digital, 4 to 20 mA 50 - 2550 ± 1% Stainless steel Stainless steel n/a -15 to +85 20.7 No
Magnetic Flow Meter Siemens Sitrans F M MAG 1100 Conductive liquids 0.05 - 10 Frequency 4 to 20 mA, PROFIBUS DP & PA, DeviceNet, HART, CANopen, MODBUS 10 – 100 (PFA)
2 – 100 (ceramic)
± 0.5% (with MAG 5000)
± 0.25% (with MAG 6000)
Stainless steel Hastelloy C (PFA)
Platinum (ceramic)
PFA or ceramic -30 to +130 (PFA)
-20 to +150 (std ceramic)
-20 to +200 (high temp ceramic)
20 (PFA)
40 (ceramic, 2 – 65 mm)
Yes (Ex version)
Magnetic Flow Meter Siemens F M MAG 1100 F Conductive liquids 0.05 - 10 Frequency 4 to 20 mA, PROFIBUS DP & PA, HART, MODBUS 10 – 100 ± 0.5% (with MAG 5000)
± 0.25% (with MAG 6000)
Stainless steel Hastelloy C (PFA)
Platinum (ceramic)
PFA (not for EX) or ceramic -30 to +130 (PFA)
-20 to +150 (std ceramic)
20 (PFA)
40 (ceramic, 10 - 65 mm)
25 (ceramic 80, 100 mm)
Yes
Magnetic Flow Sensor Magflux F5 Conductive liquids 0.25 - 10 Frequency, 4 to 20 mA 2 - 12 ± 0.15% Zirconium oxide Platinum Zirconium oxide 150 max 25 (higher on request) No
Magflow Meter Signet 2551 Conductive liquids 0.05 - 10 Frequency/ digital, 4 to 20 mA 15 - 300 ± 1% PP or PVDF Stainless steel, titanium or Hastelloy C n/a 0 to 85 10.3 No
Siemens TRANSMAG 2 with Sitrans F M 911E Magnetic Flow Sensor none none none none none none none none none none none
Magnetic Flow Meter Siemens Sitrans F M MAG 8000 Conductive liquids 0.05 - 10 Serial RS 232/485 MODBUS, pulse, datalogger option 25 - 1200 ± 0.4% of rate ± 2 mm/s (± 0.2% of rate ± 2 mm/s extended accuracy) Carbon steel Hastelloy C276 EPDM -5 to +70 20 No
Danfoss Magflo equivalents none none none none none none none none none none none
In Line Magnetic Flow Sensors SDI852 Conductive liquids 0 - 80 l/min PNP NO / NC, prog or 4...20 mA, linear 10 or 15 < 2% Stainless steel PVDF 5 - 60 10 No

The data above is intended as a guide for selection. Please check datasheets before specifying

© iCenta 2017. Specialists in precision flow meters, level sensors, instrumentation & control.