The Thermo Flo is a general-purpose flow switch offered in liquid or gas configurations for low-flow detection. It is a great choice for a diverse range of relatively clean, non-coating media in pipe or ducting. The 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The short sensor is intended for use in pipe or ducting from 1/2″ to 11/2″; the long sensor is applied in 2″ and up. The liquid flow switch set point may be adjusted from 0.04 to 3 fps, and the gas flow switch from 1 to 90 fps. The clear set point adjustment knob doubles as an LED to indicate the flow status.
Features of the Thermo-Flo GT10 Flow Switch include:
- Adjustable set point with LED for flow or no-flow status indication
- Polypropylene (PP) or PVDF sensor rated NEMA 4X or IP65.
- 1A relay selectable NO or NC via power supply wiring polarity.
Suitable for usage with:
- Deionised water
- Sulphuric acid
Specs
Contact Us Today To Enquire About Our Products And Services
Product Specification
The Thermo Flo liquid or gas flow switch is offered in PP or PVDF with a relay for PLC, SCADA or alarm interface and is broadly suited for relatively clean, non-coating media in pipe or ducting.
Specification Details of the Thermo-Flo GT10 Flow Switch:
Pipe Size
DN12 – DN63 and above
Material Body
Polypropylene-Ryton
Flow Velocity
0.3 to 27 m/sec
Accuracy
N/A
Operating Temp Range
-40°C to 60°C
Pressure Range
0.113 – 10 bar
Outputs & Comms
N/A
Insertion / Inline
N/A
Fluid Type
Clean water, dirty water, air
Applicable Liquids
Chemicals
Power
12 – 36 VDC
Approvals
CE
Connection Type
BSP, NPT