icenta-flow-meters-logo

Inductive Flow Meter – Flow 32

partner-page-oval_orig

Downloads

fluidwell-f-series-cc-cx_548
  • Low Size Flow Meter
  • Tailor Made Production
  • Three Digital Outputs

Flow 32 Inductive Flow Meter

The FLOW 32 from Comac Cal is an inductive flow meter that offers an easy and eco friendly solution. The FLOW 32 can either be produced with or without a display unit, but each variation is maintenance free.

The FLOW 32 flow meter is delivered with standard IP65 rating designed for technological processes of the most diverse batching or production stations where simplicity and minimum maintenance requirements are important to customers.

The FLOW 32 inductive flow meter is very easy to install. Electrical connection of the meter to the system is made possible through the cable entry right to the terminals.

Features of the Inductive FLOW 32 include:

  • FLOW 32 inductive flow meter is easy to install and use in the field
  • It can be supplied without any connectors
  • High repeatability of measurement over full-scale flow range
  • Possibility of choosing pulse output or DC current output
  • High resistance to abrasion
  • Measurability of the bulk of media except crude oil products
  • Possibility of using the flow monitoring function (flow switch

Find Out More

Find out more about how Magnetic Flow Meters work by clicking here!

Specs

Manufacturer: Comac Cal

Part Ref: F32

IWN: FLO-320000

Liquid: Chemical, Food and Pharmaceuticals

Media Type: Liquids

Contact Us Today To Enquire About Our Products And Services


Product Specification
Below is the product specification of the Flow 33 Inductive Flow Meter from Comac Cal. If you require further information about the Flow 33, please contact our expert customer service advisors on 01722 442 307.


Power
​24V DC±15% power with polarity reversal protection

Input Power
3 VA

Diameter
DN 4…20

Pressure
PN 25

Living Material
PVDF

Measured fluid min. conductivity
20 μS /cm

Sampling
900 samples per second

Ambient Humidity
Max. 90 %

Process Connection
DN4…DN15 – G1/2“; DN20 – G3/4“

Electrical Connection
Connector M12, 8 pin

Display
4x LED; LCD display (4×8)

Electrode Material
CrNi steel DIN 1.4571

Maximum Temperature
70 °C

Accuracy
​1% for 1…10 m/s (rep up to 0,5%)
2% for 0,2…1 m/s (rep up to 0,5%)

Communication
IO LINK (A1)
Bluetooth and IO LINK (A2)
LCD display and IO LINK (A3)

COMPANION PRODUCTS

DataView LI55 Level Controller

Part Ref: LI55

IWN: LEV-597024

The DataView LI55 Level Controller is a general-purpose level meter displaying engineering units with one 4-20 mA or...

EchoSwitch LU74-78 Ultrasonic Level Switch

The EchoSwitch LU74 through to LU78 Series from Flowline, is a general-purpose ultrasonic level sensor. This level switch...