• Bluetooth Connected App
• Reliable & Well Built
• Corrosion Proof
The Comac Cal Flow 33 inductive flow meter is an ideal solution for the customers who need pulse or current signals from the meter without a display unit.
The flow meter is manufactured in structural steel; however, full corrosion-proof construction is commonplace. The meter’s state is indicated by four informative LEDs found on the evaluation unit.
The power source for the Flow 33 is an electrical connection via a standard 8-pin M12 connector and Bluetooth communication is used to connect to its own android/windows software. The operator can set up the flow meter with their own mobile devices, such as mobile phones or tablets in the field. Thanks to this innovative application, the operator can;
It is picked up either by stainless steel, tantalum or Hastelloy electrodes. Process connections are available in the form of flanged- or inter-flanged connections, those used in food process, screwed, clamp or threaded connections.
The FLOW 33 indictive flow meter is flexible to use. Several types of lining are implemented, namely hard and soft rubber, rubber with certificate for drinking water, PTFE, PFA or E-CTFE.
Features of the Inductive FLOW 33 include:
Below is the product specification of the Flow 33 Inductive Flow Meter from Comac Cal. If you require further information about the Flow 33, please contact our expert customer service advisors on 01722 442 307.
24V DC±15% power with polarity reversal protection
Maximum fluid temperature
90 °C (according to lining)
for higher temperatures upon agreement with the manufacturer
Flow sensor degree of protection IP65, IP67, IP68
Measuring range (Qmin/Qmax)
Unidirectional/bidirectional for 0.2...12 m/s (1/60)
DN 4...600 (other DN upon agreement with the manufacturer)
CrNi steel DIN 1.4571, Hastelloy C4, Titanium, Tantalum
Flow Meter Accuracy
up to 0.5 %, rep up to 0.2 %
Max. Ambient Temperature
Rubber (hard, soft, with potable water test certificate): DN 25...DN 600 (Tmax 70 °C)
PTFE: DN 10...DN 80 (Tmax 150 °C for separate version), PVDF: DN 4...DN 20,
Rilsan: DN 25...DN 600 (Tmax 70 °C for separate version)
ETFE: DN 100...DN 600 (Tmax 150 °C), PFA, Ceramics (upon agreement with the manufacturer)
Flanged – stainless steel and structural steel with polyurethane coating
Sandwich, threaded, food grade – stainless steel
PN10 (DIN), PN16 (DIN), PN25 (DIN), PN40 (DIN), PN64 (DIN), PN100 (DIN)
10K (JIS), 20K (JIS), 40K (JIS)
150lb (ANSI), 300lb (ANSI)