Flangeless Flow Meters by Metri Measurements

Metri IC-BF Flangeless Flow Meter

Flow Meters | Turbine Flow Meters

SPECIFICATION | CAD DRAWING

• Compact easy installation
•  Field serviceable
•  High repeatable performance
•  Low pressure drop

Metri Measurements Flow Meters - Made in Britain

Between flange Wafer type turbine meters have been used successfully for many years, with little or no improvements in all that time. iCenta Controls have identified key areas of weaknesses in standard designs and produced a range of highly beneficial upgrades.

Instead of casting, which can produce rotor imbalance, weakness and discrepancies between batches, Icenta’s IC-BF Turbine Meters are completely machined from a range of solid materials. This means we can control the minute (but significant) dimensional variations which can occur with cast parts and which drive calibration
accuracy / uncertainty / linearity variations. We further ensure that every rotor is identical and will produce exceptional calibration repeatability.

Machined parts have better symmetry, which reduces rotor wobble, extending the bearing life and resulting in less calibration and/or early failures. By examining each rotor’s response to liquid flow, we have in most cases, extended the flow range, reduced rotational speed and pressure drop. Reduction in rpm’s also enhance the
longevity and should significantly reduce calibration frequency. Upgraded material selection enhances the meters’ resistance to corrosion and enhances longevity.

Metri IC-BF Flow Meter

Brand: Metri

Part Ref: IC-BF
IWN: FLO-201910

Category: Flow Meters, Turbine Flow Meters

Fluid type: Liquids

The Metri IC-GTM Turbine Flow Meter offers high accuracy and high reliability in a wide variety of gas flow measurement applications.

Specification Detail of the Metri IC-BF Turbine Flow Meter:

Pipe Size
DN25, DN50, DN80 (DN100 - pending)

Materials
Tungsten Carbide shaft and bearing
316L Stainless steel body
Rotor 413 Stainless
Options: 174PH & Duplex

Repeatability
±0.1%

Frequency Range
25 - 1500

Linearity
+/- 0.25%

Operating Temp Range
Standard: -101°C – 170°C
High: -101°C – 232°C (with high-temp pickup, consult factory for details

Max Operating Pressure Range
Up to 3600psi (room temp w/ stainless steel flanges)
Up to 3705psi (room temp w/ carbon steel flanges)

Pressure Drop
Less than 250 mbar (TBC)

Output / Display
Pulse / Selection of safe Atex /Exd options

Installation
Horizontal Vertical Flow rising

Fluid Type
Chamical, Clean Water, Fuel & Oil

Approvals
ATEX, Intrinsically safe, Exd, Exia, CSA

Process Connection
Wafer style ASME / ANSI B16.5-1996