Pointek CLS200 Capacitance Level Switch

Capacitance Level Measurement | Level Sensors

SPECIFICATION   |   CAD DRAWING

---

---

•   High chemical resistance
•   High sensitivity
•   Modular design

Pointek CLS 200 is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output, ideal for detection of liquids, solids, slurries, foam and interfaces. The digital version (with optional PROFIBUS PA) includes a display and provides additional diagnostic features.
 
The Pointek CLS 200 is offered in standard and digital versions. The standard version has 3 LED indicators with basic relay and solid-state switch alarms. The digital version provides an integral LCD display for standalone use, and provides PROFIBUS PA communication (profile version 3.0, Class B) when required.
 
The power supply is galvanically isolated and accepts a wide range of voltages (12 to 250 V AC/DC for standard version and 9 to 32 V DC for digital version). The stainless steel and PPS (PVDF optional) materials used in the probe construction provides a temperature rating up to +125°C on the process wetted portion of the probe. The switch responds to any material with a dielectric constant of 1.5 or more by detecting a change in oscillating frequency, and it can be set to detect before contact or on contact with the probe. The CLS 200 operates independently of the tank wall or pipe so it does not require an external reference electrode for level detection in a non-conductive vessel such as concrete or plastic.

Modular design and construction provide a wide choice of configurations, including rod, cable and sanitary versions. When used with a SensGuard protection cover, the CLS 200 is protected from shearing, impact and abrasion in tough primary processes.

Features of the Pointek CLS 200 include:
 

• Potted construction protects signal circuit from shock, vibration, humidity and/or condensation
• High chemical resistance
• Level detection independent of tank or pipe earth reference
• Insensitive to product buildup due to high frequency oscillation (5.5 MHz)
• High sensitivity allows installation in a wide range of liquids, solids or slurry applications
• Integral LCD display allows for easy setup of CLS 200 when you can configure switching threshold, even under the most demanding process conditions.
• Extended rod, cable and sanitary versions available
• Standard version: 3 LED indicators for adjustment control, output status and power
• Digital version: integral LCD display, and optional PROFIBUS PA communication

General Applications of the Pointek CLS 200:
 

• Liquids
• slurries
• powders
• granules
• food and pharmaceuticals
• chemicals
• hazardous areas

Siemens SITRANS Pointek CLS200 Level Switch

Brand: Siemens

Part Ref: 7ML5630
IWN: LEV-242420

Category: Capacitance Level Measurement, Level Sensors

The Pointek CLS 200 is a versatile inverse frequency shift capacitance level switch. It has optional rod/cable choices and configurable output, ideal for detection of liquids, solids, slurries, foam and interfaces.
​

Specification Detail of the Capacitance Level Switch Pointek CLS 200:

Probe Length
5500mm (cable version 30000mm)

Material Body
Epoxy coated aluminium

Flow Range 
NA

Accuracy
NA

Operating Temp Range 
-40 to 125°C

Pressure Range 
-1 … to +10bar G

Outputs & Comms 
Relay/solid-state

​Insertion / Inline 
Insertion

Fluid Type 
Liquid and solids

Applicable Liquids 
liquids, slurries, powders, granules, food and pharmaceuticals, chemicals, hazardous areas

​Power 
12-250V AC/DC 0 … 60 Hz max 2 W
​ 

Approvals 
CE, CSA, FM, C-TICK, ATEX II, WHG  VLAREM II

Connection Type 
¾” NPT [(Taper), ANSI/ASME B1.20.1] R 1″ 
[(BSPT), EN 10226/PT (JIS-T), JIS B 0203] G 1″ [(BSPP), EN ISO 228-1/ PF (JIS-P), JIS B 0202]
​ 

Top Companion Products

Looking for help with flow rate, pipe diameter or flow velocity?
Our flow rate calculator will provide the answer.

Flow Rate Calculator

OUR PARTNERS

OUR CUSTOMERS