Pro V M23 Insertion Vortex Flow Meter

Flow Meters | Vortex Flow Meters

SPECIFICATION   |   CAD DRAWING

---

---

•  Easy to install
•  High accuracy
• ​ Energy monitoring ability

Multi-variable Insertion Vortex Flow Meters for Liquid, Gas and Steam in Pipes Precision multi-variable insertion vortex flow meters utilising three primary sensing elements: a vortex shedding velocity sensor, an RTD temperature sensor, and a solid-state pressure transducer to measure the mass flow rate of liquids, gases and steam in commercial, industrial and municipal applications.
 
Features of the Insertion Vortex Pro V M23 flow meter include:
​

• Volumetric or mass flow monitoring of most liquids, gases, and steam
• Multivariable meter delivers mass flow, temperature, pressure, and density readings from a single installed device and reduces initial cost, installation cost and cost-of ownership over the lifetime of the instrument
• Compensated mass flow reading of liquids, gases, and steam
• Energy monitoring ability to compute and output energy use
• Easy to install and commission: hot tappable, process shut down not required for installation
• Reliable meter with no moving parts, no fluid to sensor contact
• High accuracy with rangeability up to 100:1
• Temperature up to 400°C
• Pressure up to 1500 psig
• Insertion style mounting permits installation in any pipe 2″ and greater
• Field configurable ranges, outputs and displays
• Remote electronics option available for use in harsh environments or locations with limited access
• 4-20mA loop powered Mass Meter design saves on energy costs
• HART protocol communications – Standard
• Modbus communications available
• FM, FMC, ATEX, IECEx Approved

Other Applications:
​ 

• Steam flow measurement
• Optimising energy management
• Energy usage billing

---

Pro V M23 Insertion Flow Meter

Brand: iCenta

Part Ref: M23V-V
IWN: FLO-958708

Category: Flow Meters, Vortex Flow Meters

Liquid: Clean Water, Dirty Water

Gas: Air, Other Gas, Steam

A series of precision multivariable insertion vortex flow meters utilising three primary sensing elements: a vortex shedding velocity sensor, an RTD temperature sensor, and a solid-state pressure transducer to measure the mass flow rate of liquids, gases and steam in commercial, industrial and municipal applications.
​ 

Specification Detail of the Pro V M23 Insertion Vortex Flow Meter:

Pipe Size
DN3 – DN600

Material Body
Stainless steel

Flow Range
Various see data sheet

Accuracy
1.2% Liquids, 1.5% gases

Operating Temp Range
-40 to 85ᵒC

​Pressure Range
2 – 175 bar

Outputs & Comms
HART, Modbus, pulsed, analogue


​

Insertion / Inline
Insertion

Fluid Type
Clean water, dirty water, air, other gas, steam

Applicable Liquids
Steam, various gases and liquids

Power
4-20mA

Approvals
ATEX, FM, FMC, IECEx

Connection Type
Flanged, ANSI, DIN, BSP
​ 

Top Companion Products

Looking for help with flow rate, pipe diameter or flow velocity?
Our flow rate calculator will provide the answer.

Flow Rate Calculator

OUR PARTNERS

OUR CUSTOMERS