SITRANS LVS200 Vibrating Level Switch

Level Sensors | Vibrating Level Switch

SPECIFICATION   |   CAD DRAWING

---

---

•  Rotatable enclosure
•  Strong vibration resistance
• ​ Detection of solids within liquid

The standard LVS200 detects high, low or demand levels of dry bulk solids in bins, silos or hoppers. The liquid/solid interface version can also detect settled solids within liquids or solids within confined spaces such as feed pipes. It is designed to ignore liquids in order to detect the interface between a solid and a liquid. A pipe extension version is available with either the standard or liquid/solid interface electronics and fork, separated by a customer supplied 1″ pipe.
 
SITRANS LVS200 has an optional 4 to 20 mA output for monitoring buildup on the fork to determine when preventative maintenance should be performed in sticky applications.
 
The LVS200 has a compact design and can be top, side or angle mounted. The vibrating fork design ensures the tines are kept clean. The unique design of the fork and crystal assembly eliminates false high level readings even if tines become damaged.
 
A signal from the electronic circuit excites a crystal in the probe causing the fork to vibrate. If the fork is covered by material, the change in vibration is detected by the electronic circuitry which causes the relay to change state after a one second delay. When the fork is free from material pressure, full vibration resumes and the relay reverts to its normal condition.
 
Features of the Sitrans LVS 200 include:
 

• High resistance to mechanical forces
• Strong vibration resistance to high bulk material loads
• Rotatable enclosure
• Suitable for low density material: standard version, 20 g/l (1.3 lb/ft3); liquid/solid interface version, 50 g/l (3 lb/ft3), and low density option min. 5 g/l (0.3 lb/ft3)
• Customer desired extensions up to 20 000 mm (787″)
• Optional detection of solids within liquid
• Durable short fork option with 165 mm (6.5 inch) insertion length

 
General Applications:
​ 

• Dry bulk solids in bins, silos, hoppers
• Settled solids within liquids (interface version)

SITRANS LVS200 Level Switch | Sensor

Brand: Siemens

Part Ref:
IWN: LEV-497649

Category: Level Sensors, Vibrating Level Switch

Vibrating Point Level Switch for High or Low Levels of Bulk Solids. The Sitrans LVS 200 is a vibrating point level switch for detecting high, low or demand levels of dry bulk solids in bins, silos or hoppers.
 

Specification Detail for the Sitrans LVS 200 Vibrating Level Switch:

Pipe Insertion Length Size 
300 – 4000mm

Material Body
Epoxy coated aluminium

Material density 
Min 20g/l (1.2lb/ft³)

Degree of protection 
IP66/Type 4/NEMA 4

Operating Temp Range 
-40 to 150°C

​Pressure Range 
Max 10 Bar g

Outputs & Comms 
Relays /relay delay/signal delay/fail-safe/alarm/PNP/2-wire

​Location 
Indoor/outdoor

Fluid Type 
Dry Bulk solids

Applicable Liquids 
NA

Power  
230 V AC, +10 %, 50 … 60 Hz, 8 VA,  40 V DC, +10 %, 1.5 W

Approvals 
CSA/FM General Purpose, CE, CSA/FM Dust Ignition Proof
C-TICK, ATEX II 1/2 D, IECex

Connection Type 
R 1½” [(BSPT),
1¼” NPT [(Taper),
R 1½” [(BSPT),
1½” NPT [(Taper),
​ 

Top Companion Products

Looking for help with flow rate, pipe diameter or flow velocity?
Our flow rate calculator will provide the answer.

Flow Rate Calculator

OUR PARTNERS

OUR CUSTOMERS