d·flux Multi Series

Multi-Parameter Mass Flow Meters & Mass Flow Controllers for Gases

SPECIFICATION   |   CAD DRAWING

---

---

•  Small | Compact Design
•  Alarm Warning & Diagnostics
•  High Flow Rates
​ 

The Vögtlin d⋅flux Multi Series is a fast and reliable multi-parameter mass flow meter for gases with measurement outputs for mass, volumetric and normalised flow, pressure and temperature.

One of the many advantages of this laminar flow meter is the ability to easily switch to a different gas without a loss in accuracy.

​
Features of the d⋅flux Multi Series:

• The unit is available as meter or with a strong integrated control valve as controller
• Flow rates up to 1400 ln/min
• Multiple pre-programmed gases
• State-of-the-art communication
• Wide application scope IP54
• Wireless device access with the free Vögtlin Connect app
• Alarm, warning and diagnostic features
• High accuracy, sample rate and fast response
• Minimum Inlet required
• Custom application profiles
• Introducing Vögtlin Automated Dynamics VADy®

​ 

d⋅flux Multi Series | Mass Flow & Controllers

Brand: Vögtlin

Part Ref: d⋅flux
IWN: FLO-DFLUX

Category: Flow Meters, Mass Flow Meters, Mass Flow Controllers

Gases

Specification Detail of the d⋅flux Mass Flow Meter | Controller:

Measuring Ranges
Standard ranges
(air / user adjustable) 
LFE1400 from 0-1000 ln/min to 0-1400 ln/min
LFE1000 from 0-700 ln/min to 0-1000 ln/min
LFE700 from 0-500 ln/min to 0-700 ln/min
LFE500 from 0-350 ln/min to 0-500 ln/min

Accuracy
0.5% of user full scale + 1% of measured value (after tare at operating conditions)
 

Media
All gases and gas mixtures that are compatible with the selected materials.
The device is not suitable for Hydrogen, Helium, corrosive and explosive gases.

Repeatability
± 0.2% of factory full scale (according to SEMI standard E56-0309)

Longterm Stability
Typical < 0.2% of measured value / year after tare

Power Supply Meter
15-36 Vdc, (200 mA@24Vdc, regulated) / Controller: 24 Vdc ±10%, (2000mA@24Vdc, regulated)
Power in through M8-4P connection or optionally through D-sub connection
(ripple should not exceed 100 mV peak-to-peak) We recommend that the body of this unit is properly connected to ground

Operation Pressure
1  to 14 bar a

Temperature
environment/gas) -20 to +60 °C (-4 to 140 °F)

Humidity gas
0-95% Rh (non-condensing)

Pressure sensitivity
< 0.08% FFS5+0.1% MV per bar (typical air)

Temperature sensitivity
<0.02% FFS* per 1 °C of inlet gas temperature @ 7 bar a pressure

Accuracy temperature
Typically ± 0.5 °C (not certified)
​ ​

Top Companion Products

Looking for help with flow rate, pipe diameter or flow velocity?
Our flow rate calculator will provide the answer.

Flow Rate Calculator

OUR PARTNERS

OUR CUSTOMERS