The insertion EX DELTA II vortex meter is an economic option for pipelines greater than 200mm diameter. In new installations or retrofit, users only need to insert the probe into the pipeline. The insertion EX DELTA series includes options to measure liquid or gas/steam flows. The hot-tap type is particularly beneficial for in-line measurement of a continuous process or where the process flow cannot be interrupted. Additional design and installation options include fixed or replaceable sensor and integral or remote indicator, with or without display.
Features of the Vortex OVAL Insertion EX DELTA II flowmeter include:
- Stainless steel construction
- Versions for liquids or gas/steam flows
- Available with fixed or hottap type sensor
- Available with integral or remote indicator, with or without display
- Applicable pipeline diameter 200 – 2000 mm
Wide flow range:
- Liquid: 72 to 67800 m3/hr
- Gas: 923 to 565000 m3/hr
- Steam: up to 3680 t/hr (3.03 to 1760 t/hr at 5 Bar)
- Wide temperature range -40 to +300°C
- Operating pressure up to 13.7 Bar
- Accuracy: ± 2% of FS
- Outputs: 4 – 20 mA or pulse
- Smart type with Hart® and field bus communication
- ATEX, FM, CSA and TIIS approved
Specs
Contact Us Today To Enquire About Our Products And Services
The insertion EX DELTA II vortex flowmeter is an economic option for pipelines greater than 200mm diameter and includes options to measure liquid or gas/steam flows
Specification Detail of the Vortex Flowmeter OVAL Insertion EX DELTA II:
Pipe Size
DN200 – DN2000
Material Body
Stainless steel
Flow Range
Liquid: 72 to 67800m³/h, Gas: 923 to 565000 m³/h, Steam: up to 3680 t/hr
Accuracy
±2% of FS
Pressure Range
Up to 13.7 bar
Outputs & Comms
4 – 20mA or pulse, HART and Fieldbus comms
Operating Temp Range
-10 to 300ᵒC
Insertion / Inline
Insertion
Fluid Type
Clean water, dirty water, air, other gas, steam
Applicable Liquids
Liquids, Gases and Steam
Power
12 to 45V DC
Approvals
ATEX, FM, CSA and TIIS approved
Connection Type
Flanged ANSI, DIN, JIS