icenta-flow-meters-logo

FA 500 Dew point sensor with integrated display and alarm relay

partner-page-oval_orig

Downloads

  • Long-term stability
  • Integrated display
  • Quick adaption time

FA 500 Dew point sensor with integrated display and alarm relay

With the FA 500 you make the right choice for highest precision in dew point measurements. Our sensor offers a wide span of measuring ranges perfectly matched to the needs of different compressed air dryers. Rely on us for accurate results in any situation. Monitoring a compressed air dryer is critical to increase energy efficiency, ensure product quality, prevent machine damage, identify maintenance needs and achieve cost savings. This contributes to the smooth operation of compressed air systems in various industrial applications.

  • Multiple display pages to show dew point and other measured values such as relative humidity and temperature
  • Definition of threshold values for the alarm relay, definition of hysteresis
  • Scaling of the analog output 04…20 mA and switching to other measured variables
  • Input of system pressure as well as reference pressure for calculation of reference dew points, e.g., atmospheric dew point

Features of the Portable Dew Point sensor – FA 500 include:

  • Ideal for all types of compressed air dryers with different measuring ranges such as -80…+20°Ctd; -60…+30°Ctd; -20…+50°Ctd
  • Sensor element insensitive against condensation and water
  • Maximum pressure 500 bar (special version)
  • Long-term stable and drift-proof, thus optimized calibration intervals
  • Gas-independent measurement, also suitable for other non-corrosive gases
  • Fast response time, especially in case of moisture ingress
  • BSP- or NPT-Threads
  • Protection class IP 65
  • Analog output 4…20 mA and Modbus RTU (RS 485) interface, contact relay with limit value adjustable via keys (max. 60 VDC, 0.5A)
  • Optional: Modbus TCP (Ethernet), Modbus TCP PoE (Ethernet) or M-Bus interface
  • Measured values available in different units, pressure dew point [°Ctd], temperature [°C], rel. humidity [%rh], abs. humidity [g/m³], moisture content [g/kg], moisture content V/V [ppmV/V], water vapor partial pressure [hPa], atmospheric dew point [°Ctd.atm]
  • On-site sensor diagnostics with handheld device or CS Service Software

Specs

Manufacturer: CS Instruments

Part Ref: FA 500

Contact Us Today To Enquire About Our Products And Services


Product Specification
Below is the product specification of the Dew point sensor with integrated display and alarm relay from CS Instruments. If you require further information about the FA 500, please contact our expert customer service advisors on 01722 442 307.


Measuring range
-80…20 °Ctd, -60…
30 °Ctd,-20…50 °Ctd,
or 0…100% RH

Accuracy
± 1 °C at +50…-20 °Ctd
± 2 °C at -20…-50 °Ctd
± 3 °C at -50…-80 °Ctd

Pressure range
-1…50 bar
Special version up to
500 bar

Power supply
24 VDC (10…36 VDC)

Protection class
IP 65

EMC
In acc. with DIN EN 61326-1

Operating temperature
-20…50 °C

Connection
2 x M12, 5-pin for analogue output, Modbus-RTU and alarm output, M-Bus (optional)
Ethernet (PoE) (optional)

PC connection
Output voltage: 24 VDC ± 10%
Output current: 120 mA in continuous operation

Output: (3-wire)
4…20 mA = -80…20 °Ctd
4…20 mA = -60…30 °Ctd
4…20 mA = -20…50 °Ctd

Burden for analogue output
< 500 Ω

Alarm relay
NC, max. 60 VDC, 0.5 A

Screw-in thread
Stainless steel 1.4404:
G 1/2″, optional: UNF 5/8″,
NPT 1/2”

Dimensions housing
76.5 x 85 x 75 mm (WxHxD)