Industrial Inductive Flow 38 Flow Meter
Downloads
- Very Easy to Use
- Reliable & Well Built
- Compact Design with Rotatable Display
The Flow 38 industrial inductive flow meter, houses a digital display unit. Well-built, reliable flow meter designed for a wide range of measurements of electrically conductive fluids in various industries. With a wide variety of design specifications. Meaning, that the flow meter can be modified according to the customer’s specific requirements. Both mechanically and setting the evaluation unit on their own.
The flow meters evaluation unit made in three versions, standard design (head), the advantage of which is a high IP rating (IP67), or rotatability up to 350°, meaning meter readings easily taken by the client, even in compact areas. The standard design, made either in compact, or separated versions. Another type of evaluation unit is the front design, the separated design of the front version offers the possibility of DIN rail attachment. Panel design, the last version of the evaluation unit, which means the advantage of installing the display unit in an electrical cabinet door, could be achieved.
The flow 38 inductive flow meter offers a wide range of outputs and communications for connecting to many different types of control systems. There are two pulse outputs (400 Hz max) with the optional setting to flow switch/state/direction, 4÷20 mA current output or RS485 communication (M-BUS/Mod-Bus protocols). Data, stored in micro-SD card also in datalogger mode.
The flexibility is ensured, by several types of lining, made of hard and soft rubber, the rubber has certificate for drinking water, PTFE, PFA or E-CTFE.
FLOW 38 Industrial Inductive Flow Meter Main Features:
- Digital display unit rotatable by 350° for easy monitoring
- Add-on card for storage/datalogger in microSD, MBus communication
- Two fully adjustable outputs impulse/flow switch/status/flow direction
- Very easy to use.
- High variability of process connection.
- Customized building length
- Sensor in full corrosion-proof design
- High dynamic measuring range
- Highly accurate
- Wide range of materials for liners and electrodes
Specs
Contact Us Today To Enquire About Our Products And Services
Product Specification
Below is the product specification of the Flow 38 Inductive Flow Meter from Comac Cal. If you require further information about the Flow 38, please contact our expert customer service advisors on 01722 442 307.
Power
110…230 VAC (50/60 Hz), 24 VAC/VDC with polarity reversal protection
Input Power
4.6 VA
Min. conductivity of fluid
20 μS/cm (at a lower conductivity, upon agreement with the manufacturer)
Flow sensor degree of protection
IP65, IP67, IP68
Diameter Nominal
DN 4…600 (other DN upon agreement with the manufacturer)
Electrode Material
CrNi steel DIN 1.4571, Hastelloy C4, Titanium, Tantalum
Frame
All-welded
Flow Meter Accuracy
up to 0.5 %, rep up to 0.2 %
Max. Ambient Temperature
55 °C
Lining material.
Rubber (hard, soft, with potable water test certificate): DN 25…DN 600 (Tmax 70 °C)
PTFE: DN 10…DN 80 (Tmax 150 °C for separate version), PVDF: DN 4…DN 20
Rilsan: DN 25…DN 600 (Tmax 70 °C for separate version)
ETFE: DN 100…DN 600 (Tmax 150 °C), PFA, Ceramics (upon agreement with the manufacturer)
Sensor material
Flanged – stainless steel and structural steel with polyurethane coating.
Sandwich, threaded, food grade – stainless steel.
Pressure
PN10 (DIN), PN16 (DIN), PN25 (DIN), PN40 (DIN), PN64 (DIN), PN100 (DIN)
10K (JIS), 20K (JIS), 40K (JIS)
150lb (ANSI), 300lb (ANSI)