The Flow 38 industrial inductive flow meter from Comac Cal houses a digital display unit. This well-built, reliable flow meter is designed for a wide range of measurements of electrically conductive fluids in various industries.
The Flow 38 comes in a wide variety of design specifications, meaning the flow meter can be modified according to the customer’s specific requirements both mechanically and by setting the evaluation unit on their own.
The flow meter’s evaluation unit is made in three versions. The first is the standard design (head), the advantage of which is a high IP rating (IP67) or rotatability up to 350°, meaning meter readings are easily taken by the client, even in compact areas. The standard design can be made either in compact or separated versions. Another type of evaluation unit is the front design. The separated design of the front version offers the possibility of DIN rail attachment. Panel design is the last version of the evaluation unit, which means the advantage of installing the display unit in an electrical cabinet door can be achieved.
The flow 38 inductive flow meter offers a wide range of outputs and communications for connecting to many different types of control systems. There are two pulse outputs (400 Hz max) with the optional setting to flow switch/state/direction, 4÷20 mA current output or RS485 communication (M-BUS/Mod-Bus protocols). Data can be stored in micro-SD card also in datalogger mode.
The flexibility of use is ensured by several types of lining, namely made of hard and soft rubber, rubber with certificate for drinking water, PTFE, PFA or E-CTFE.
FLOW 38 Industrial Inductive Flow Meter Main Features:
- Digital display unit rotatable by 350° for easy monitoring
- Add-on card for storage/datalogger in microSD, MBus communication
- Two fully adjustable outputs impulse/flow switch/status/flow direction
- Very easy to use.
- High variability of process connection.
- Customized building length
- Sensor in full corrosion-proof design
- High dynamic measuring range
- Highly accurate
- Wide range of materials for liners and electrodes
Specs
Contact Us Today To Enquire About Our Products And Services
Product Specification
Below is the product specification of the Flow 38 Inductive Flow Meter from Comac Cal. If you require further information about the Flow 38, please contact our expert customer service advisors on 01722 442 307.
Power
110…230 VAC (50/60 Hz), 24 VAC/VDC with polarity reversal protection
Input Power
4.6 VA
Min. conductivity of fluid
20 μS/cm (at a lower conductivity, upon agreement with the manufacturer)
Flow sensor degree of protection
IP65, IP67, IP68
Diameter Nominal
DN 4…600 (other DN upon agreement with the manufacturer)
Electrode Material
CrNi steel DIN 1.4571, Hastelloy C4, Titanium, Tantalum
Frame
All-welded
Flow Meter Accuracy
up to 0.5 %, rep up to 0.2 %
Max. Ambient Temperature
55 °C
Lining material.
Rubber (hard, soft, with potable water test certificate): DN 25…DN 600 (Tmax 70 °C)
PTFE: DN 10…DN 80 (Tmax 150 °C for separate version), PVDF: DN 4…DN 20
Rilsan: DN 25…DN 600 (Tmax 70 °C for separate version)
ETFE: DN 100…DN 600 (Tmax 150 °C), PFA, Ceramics (upon agreement with the manufacturer)
Sensor material
Flanged – stainless steel and structural steel with polyurethane coating.
Sandwich, threaded, food grade – stainless steel.
Pressure
PN10 (DIN), PN16 (DIN), PN25 (DIN), PN40 (DIN), PN64 (DIN), PN100 (DIN)
10K (JIS), 20K (JIS), 40K (JIS)
150lb (ANSI), 300lb (ANSI)