Multi-variable Insertion Vortex Flow Meters for Liquid, Gas and Steam in Pipes Precision multi-variable insertion vortex flow meters utilising three primary sensing elements: a vortex shedding velocity sensor, an RTD temperature sensor, and a solid-state pressure transducer to measure the mass flow rate of liquids, gases and steam in commercial, industrial and municipal applications.
Features of the Insertion Vortex Pro V M23 flow meter include:
- Volumetric or mass flow monitoring of most liquids, gases, and steam
- Multivariable meter delivers mass flow, temperature, pressure, and density readings from a single installed device and reduces initial cost, installation cost and cost-of ownership over the lifetime of the instrument
- Compensated mass flow reading of liquids, gases, and steam
- Energy monitoring ability to compute and output energy use
- Easy to install and commission: hot tappable, process shut down not required for installation
- Reliable meter with no moving parts, no fluid to sensor contact
- High accuracy with rangeability up to 100:1
- Temperature up to 400°C
- Pressure up to 1500 psig
- Insertion style mounting permits installation in any pipe 2″ and greater
- Field configurable ranges, outputs and displays
- Remote electronics option available for use in harsh environments or locations with limited access
- 4-20mA loop powered Mass Meter design saves on energy costs
- HART protocol communications – Standard
- Modbus communications available
- FM, FMC, ATEX, IECEx Approved
Other Applications:
- Steam flow measurement
- Optimising energy management
- Energy usage billing
Specs
Contact Us Today To Enquire About Our Products And Services
Product Specification
A series of precision multivariable insertion vortex flow meters utilising three primary sensing elements: a vortex shedding velocity sensor, an RTD temperature sensor, and a solid-state pressure transducer to measure the mass flow rate of liquids, gases and steam in commercial, industrial and municipal applications.
Specification Detail of the Pro V M23 Insertion Vortex Flow Meter:
Pipe Size
DN3 – DN600
Material Body
Stainless steel
Flow Range
Various see data sheet
Accuracy
1.2% Liquids, 1.5% gases
Operating Temp Range
-40 to 85ᵒC
Pressure Range
2 – 175 bar
Outputs & Comms
HART, Modbus, pulsed, analogue
Insertion / Inline
Insertion
Fluid Type
Clean water, dirty water, air, other gas, steam
Applicable Liquids
Steam, various gases and liquids
Power
4-20mA
Approvals
ATEX, FM, FMC, IECEx
Connection Type
Flanged, ANSI, DIN, BSP