TRANSMAG 2 with SITRANS F M 911E Magnetic Flow Sensor
Downloads
- Suitable for heavy duty use
- Accurate, repeatable, and stable
- SmartPLUG concept
iCenta is an authorised distributor for Siemens Automation & Drives
SITRANS F M TRANSMAG 2 is a pulsed alternating field magnetic flow meter where the magnetic field strength is much higher than conventional DC pulsed magnetic flowmeters.
This makes it ideal for difficult applications such as:
- High concentrated paper stock > 3%
- Heavy mining slurries
- Mining slurries with magnetic particles.
TRANSMAG 2 is used with the SITRANS F M 911/E sensor, available with diameters of DN 15 to DN 1000.
The pulsed alternating field technology gives a strong magnetic field, high excitation frequency and stable zero point. It is accurate and fast responding with a stable flow signal on heavy duty applications. It uses the SmartPLUG concept with all the calibration data and includes compensation for magnetic particles.
Specs
Contact Us Today To Enquire About Our Products And Services
Product Specification
A Magnetic Flow Meter with a Strong Magnetic Field for Media with a High Percentage of Solids.
A high-powered flow meter consisting of the TRANSMAG 2 flow transmitter and 911/E flow sensor for special applications such as pulsating flow, media with low conductivity and a high percentage of solids.
Specification Detail for TRANSMAG 2 with SITRANS F M 911E :
Pipe Size
DN15 – DN1000
Wetted Materials
Neoprene PTFE, Hardrubber, Linatex, Novolak, Stainless steel, Hastelloy C4, Titanium
Flow Range
2 to 2,8275 m3/hr
Accuracy
± 0.5% of measured value
Operating Temp Range
-20 to 150ᵒC
Pressure Range
Up to 40 bar
Outputs & Comms
4-20mA, Pulse, digital output, HART Communications, PROFIBUS DP
Insertion / Inline
Inline
Fluid Type
Clean water, dirty water, slurry
Applicable Liquids
Water, wastewater, pulp
Power
100 – 250 V AC ± 15%
Approvals / IP Rating
CE / IP67 / IP68
Connection Type
Flanged DIN 2501, ANSI B 16.5, JIS, table, special connections