Vögtlin’s tried and tested mass flow meters and mass flow controllers are now available with IP67/NEMA 6 protection against solid particles and water and ATEX certification (Category 3 / Zone 2 & 22) for rough environments. They can be connected via cable gland or M12 plug and are also available with optional Profibus interface.
Need help choosing an ATEX Industrial Massflow Meter?
Features of the Red-y Industrial Thermal Mass Flow Meters include:
- High accuracy (up to ± 0.3% of full scale + ±0.5% of reading) flow measurement and control with wide dynamic range
- IP67 / NEMA 6 protection against solid particles and water
- Includes ATEX certification (Category 3 / Zone 2 & 22)
- Short response time (meter: 50ms; controller 150ms)
- Compensation for pressure and temperature changes
- Calibrated with real gas, which guarantees high accuracy and reproducibility
- Multigas use: one meter or controller can be used for up to 10 different gases or gas mixtures
- CMOS sensor technology with digital (Modbus RTU) and analogue interface as standard
- Simple access via any PC (no additional electronic equipment required)
- Available with different connection types: Cable gland with compression fitting or optional M12 plug on top
- Profibus connection available
- Supplied with ‘get red-y’ software on CD for gas flow measuring and controlling (view flow rate & temperature, change set points, select measured gas, graphical display of measured data, adjust control parameters, monitor operating state) (click here to download a copy free of charge)
- High quality mass meter, produced and calibrated at Vögtlins operations in Switzerland
Special discount package for universities & research institute
CONTACT US FOR MORE DETAILS ON DISCOUNTS
Other Applications:
- Leak measurement & detection
- Control of gas atmospheres
- Measurement of gas consumption
- Burner gas control (furnace construction)
- Calibration of instruments (laboratories)
Specs
Contact Us Today To Enquire About Our Products And Services
Industrial Thermal Mass Flow Meters and Mass Flow Controllers for Gases with IP67 & Ex Protection Vögtlin’s tried and tested mass flow meters and mass flow controllers are now available with IP67/NEMA 6 protection against solid particles and water and ATEX certification (Category 3 / Zone 2 & 22) for rough environments
Specification Detail of the Red-y Industrial Thermal Mass Flow Meters:
Pipe Size
DN6 – DN12
Material Body
Stainless Steel
Flow Range
0.05 – 450l/min
Accuracy
0.3% or 1%
Operating Temp Range
0 to 50ᵒC
Pressure Range
10BarG
Outputs & Comms
4/20mA 0-20mA 0-5V 1-5V 0-10V 2-10V – Modbus – Profibus
Insertion / Inline
Inline
Gas Type
Air, O2*, N2*, He, Ar, CO2, H2, CH4, C3H8 (other gases and gas mixtures on request)
Applicable Liquids
N/a
Power
24 Vdc
Approvals
ATEX
Connection Type
G (BSP), VCR, custom manifold