+GF+ Signet 9900-1BC Batch Controller System
The Signet 9900-1BC Batch Controller system provides control capability and process fine-tuning in a familiar package. The programming interface uses a four-button keypad and an intuitive menu for adjusting a batching system to the best performance possible. Choose between simple or advanced modes. In simple mode, relay outputs can be used for batching, external counter, missing signal alarm and 4 to 20 mA output can be used to indicate batch status. In advanced mode relays can also be used for end of batch pulse, two-stage shutdown, overrun alarm, high flow detection, total volume, or source volume alarm. New to Generation IV, Automatic Overrun Compensation feature. The 9900-1BC can measure excess flow after a batch stops and use it to reduce flow to the next batch by de-energising the batch relay early, thus closing the flow control valve, and eliminating batch overrun.
Designed for a variety of batch applications, the 9900-1BC can save up to 10 batch sizes for batching or blending a variety of liquid volumes. Customise batch names for easy distinction between batches. One K-Factor can be used for all batches or use a different K-Factor for each batch for when different liquids are batched. User can choose to be prompted prior to starting a batch with a Yes | No or with a password to prevent inadvertently starting a batch.
Features of the Signet 9900-1BC Batch Controller System include:
- New Rear Enclosure option means the 9900-1BC Batch Controller can be installed on a pipe or wall mounted in addition to panel mount installations.
- Store up to 10 batch sizes for batching or blending a variety of liquid volumes.
- Customise 10 batch names for easy distinction between batches.
- Modular Design – Can be purchased as a complete system or add a Batch Module and Relay Module to an existing 9900 Transmitter (Generation II or later)
- New! Automatic Overrun Compensation can eliminate excess flow by automatically reducing the next batch size by the overrun value of previous batch.
- Remote control wiring with start, stop & resume terminals for remote batch control.
- 3 programmable relays, one open collector, two dry-contact relays
- Two-stage control to prevent overfilling or to minimise water hammer.
- Confirmation START/RESUME – Can prompt user prior to starting each batch with a Yes/No or password to prevent inadvertently starting a batch.
- Enter 10 different K-Factors – one per batch for when different liquids are batched.
Typical Applications:
- Batch Process
- Filter Backwash Initiation
- Chemical Addition
- Canning and Bottling
- Tank Filling
- Bulk Storage Transfer
- Chemical Processing
- Food and Beverage
- Life Sciences
- Water Treatment
Specs
Contact Us Today To Enquire About Our Products And Services
Product Specification
The Signet 9900-1BC Batch Controller system provides control capability and process fine-tuning in a familiar package. The programming interface uses a four-button keypad and an intuitive menu for adjusting a batching system to the best performance possible.
Specification Detail of the 9900-1BC Batch Controller:
Input Channels
One
Input Types
Digital (S3L): Serial ASCII, TTL Level, 9600 bps;
Frequency: Range – 0.5 to 1500Hz,
Accuracy – 0.5% of reading
Materials
Case: PBT
Window: shatter resistant glass
Keypad: 4 buttons, injection moulded silicon rubber seal
Display
Back-lit 7- and 14-segment
Operating Temp Range
-10° to 70°C
Output
Current output – One (1); Two (2) with 4 to 20 mA output module
Relay Specifications
Dry-Contact Relays (2), Open Collector (1)
Input Power
24 VDC input; range: 10.8 to 35.2 VDC regulated.
Approvals
CE, UL, CUL, FCC, RoHS compliant, China RoHS
Manufactured under ISO 9001 for Quality, ISO 14001 for Environmental Management
and OHSAS 18001 for Occupational Health and Safety
Enclosure Rating
Designed to meet NEMA 4X/IP65 (front face only)