Thermo-Flo FT10 Flow Switch



  • Solid state sensor
  • Suitable for low flow detection
  • Available in short or long sensor

Thermo-Flo FT10 Flow Switch

Offered in liquid and gas sensor types, the general-purpose flow switch package provides reliable no or low-flow detection of relatively clean non-coating media with a 16A compact flow controller for pump or process protection. Liquid examples includes water and sulfuric acid. The optional flash alarm brings attention to low-flow alarm conditions. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2” to 1 1/2”, and the long flow sensor is used in 2” and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases for low-flow control. The flow sensor is best applied in applications with relatively constant temperature.

Features of the Thermo-Flo Flow Switch include:

  • Rugged PP-Ryton® or PVDF sensor for corrosive liquids and gases
  • Fail-safe relay control of pumps or valves with 0-60 second delay
  • PP enclosure rated NEMA 4X with swivel base for conduit alignment.
  • Optional strobe brings immediate attention to flow alarm conditions.
  • Invert switch changes relay state from NO to NC without rewiring
  • Solid state sensor is not damaged by over-ranging flow velocities.


A common problem with metering pumps in flow applications is the characteristic of the output flow. The pulsating flow makes it difficult for flow switches to get an accurate and consistent flow rate. Often flow switches will not work because they are not able to see a reliable flow output. The Flowline Pulse Point fitting is designed to stabilize the pulsing flow for the Thermo-Flo flow switch. The cylindrical chamber creates a mini vortex that translates to a relatively constant flow. The Thermo-Flo flow switch will be able to read the flow and provide an accurate and low-cost flow switch. The Flowline Pulse Point fitting is ideal for use in metering pump applications.

Ordering More Than Five?: If your organisation requires five or more units, please contact our team of experts for a quotation.


Manufacturer: Flowline

Gas: Air

Media Type: Gases

Contact Us Today To Enquire About Our Products And Services

Product Specifications

The Thermo Flo liquid or gas flow switch is offered in PP or PVDF with a relay for PLC, SCADA or alarm interface and is broadly suited for relatively clean, non-coating media in pipe or ducting.


Specification Details of the Thermo-Flo FT10 Flow Switch:

Pipe Size

DN12 – DN63 and above

Material Body


Flow Velocity

0.3 to 27 m/sec



Operating Temp Range

-40°C to 60°C

Pressure Range

0.113 – 10 bar

Outputs & Comms


Insertion / Inline


Gas Type


Applicable Gas



12 – 36 VDC



Connection Type


2250 Hydrostatic Level Sensor

Part Ref: 2291-x-xx-x

IWN: LEV-003902

The 2291 Guided Wave Radar level transmitter is designed for continuous level measuring of conductive or non-conductive liquids,...

2290 Non-contacting Radar Level Transmitter

Part Ref: 2290-x-xx-x

IWN: LEV-003898

The 25 GHz (K-band) +GF+ 2290 Pulse Radars are the most progressive Non-contacting Radar Level Transmitter for industrial...